CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Centroid Error?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 21, 2006, 01:34
Default Centroid Error?
  #1
manu
Guest
 
Posts: n/a
Hi, I am facing Centroid Error problems with trimmed meshes. It is generally error #406 and #71 (centroid in other volume and cell overlap). Are these problems are quite often with trimmed mesh? What can be the reason for the same? How to avoid them and how to rectify them? Thanks for reading.
  Reply With Quote

Old   September 14, 2006, 06:23
Default Re: Centroid Error?
  #2
Ge
Guest
 
Posts: n/a
hi, it does nor happen, unless you got your mesh repaired manually. it sounds like you have two 3d elements, which one is bigger than the other. you have to delete one element, be careful which one futs in your mesh model.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to get the centroid of the walls kk FLUENT 0 June 7, 2007 18:13
cell centroid computation KRK FLUENT 0 February 9, 2007 13:04
centroid problem eos CD-adapco 7 December 7, 2006 17:45
how to get x coordinate of a centroid in a cell wanghong FLUENT 1 February 27, 2006 03:38
radius of each cell centroid Bikash FLUENT 0 March 3, 2005 17:33


All times are GMT -4. The time now is 16:21.