CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Help about the CSET

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 5, 2006, 02:41
Default Help about the CSET
  #1
ggbaby
Guest
 
Posts: n/a
In my case, I have solid part and liquid part. the solid part is a round tube. Now I want to select the fluid cell that the distance to round tube in 0.2m. How to use the CSET command to do that?

  Reply With Quote

Old   September 5, 2006, 07:52
Default Re: Help about the CSET
  #2
saran
Guest
 
Posts: n/a
hai

You can use,

cset news fluid

(or)

cset news type 1 ( if your fluid cell type is 1 )

(or)

cset news gran xmin,xmax,ymin,ymax,zmin,zmax,coordinatesystem.

Hope this will help you.

Regards, saran.
  Reply With Quote

Old   September 5, 2006, 23:51
Default Re: Help about the CSET
  #3
ggbaby
Guest
 
Posts: n/a
Thank you vermy for giving me the answer. But using this method, I can get a rectangle zone. but I want a round zone. How to do this?
  Reply With Quote

Old   September 6, 2006, 05:51
Default Re: Help about the CSET
  #4
Anton Lyaskin
Guest
 
Posts: n/a
Use cylindrical coordinate system in CSET, GRAN
  Reply With Quote

Old   September 18, 2006, 12:13
Default Re: Help about the CSET
  #5
Jamie
Guest
 
Posts: n/a
help, cset
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
cave cset vs vave vset MK CD-adapco 1 October 29, 2006 21:44
how to change the number of cset and vset lenson CD-adapco 3 October 10, 2005 06:40
CSET on a section Franch CD-adapco 3 January 16, 2002 06:26


All times are GMT -4. The time now is 09:29.