CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   pro-am mesh quality (http://www.cfd-online.com/Forums/cd-adapco/55602-pro-am-mesh-quality.html)

Mac September 7, 2006 02:41

pro-am mesh quality
 
Hi, this is Pro-Am related. After generating a trimmed mesh with Pro-am, I encounter 10-15 cells still not passing the required quality criteria. What are the ways of improving the quality for these cells ? Please send in your comments.

Thanks, Mac.

Sidd September 9, 2006 07:50

Re: pro-am mesh quality
 
If number of cells are not quite large compared to your total cell numbers, you can fix these cells by hand, by doing some local modifications. And if quality failure cells are large in number, then best way is to identify the problematic reagion and rectify the corresponding shells itself in surface mesh and redo the trimmed cells generation.


All times are GMT -4. The time now is 00:42.