CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

pro-am mesh quality

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   September 7, 2006, 02:41
Default pro-am mesh quality
Posts: n/a
Hi, this is Pro-Am related. After generating a trimmed mesh with Pro-am, I encounter 10-15 cells still not passing the required quality criteria. What are the ways of improving the quality for these cells ? Please send in your comments.

Thanks, Mac.
  Reply With Quote

Old   September 9, 2006, 07:50
Default Re: pro-am mesh quality
Posts: n/a
If number of cells are not quite large compared to your total cell numbers, you can fix these cells by hand, by doing some local modifications. And if quality failure cells are large in number, then best way is to identify the problematic reagion and rectify the corresponding shells itself in surface mesh and redo the trimmed cells generation.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
mesh quality ? amine CFX 4 March 17, 2008 17:34
Mesh Quality Ross CFX 2 October 28, 2006 14:46
mesh quality julie FLUENT 5 July 26, 2004 05:31
mesh quality sxf CFX 3 January 17, 2003 18:25
CFX 5.4.1 mesh quality? joseph CFX 9 October 18, 2001 16:02

All times are GMT -4. The time now is 11:25.