CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

How to create a hole on the surface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 27, 2006, 17:36
Default How to create a hole on the surface
  #1
Radhika
Guest
 
Posts: n/a
Hi

I am relatively new to star cd. I have to model the flow in a circular duct with a hole on the surface. I need to use brick elements for meshing. How do I create the hole on the surface using star cd?
  Reply With Quote

Old   October 29, 2006, 21:42
Default Re: How to create a hole on the surface
  #2
DB
Guest
 
Posts: n/a
Hi,

You need to draw a solid model in either proE or SolidWorks and then export it in prosurf to triangulate the surface (create a surface mesh) and from there open it in proam to create a volume mesh.

DB
  Reply With Quote

Old   October 30, 2006, 00:51
Default Re: How to create a hole on the surface
  #3
Radhika
Guest
 
Posts: n/a
Thanks a lot! I will try that.
  Reply With Quote

Old   November 20, 2006, 07:06
Default Re: How to create a hole on the surface
  #4
kathir
Guest
 
Posts: n/a
using STAR-Design software you can draw the diagram very easily like modelling softwares. then you can create automatic mesh in star-design itself.
  Reply With Quote

Old   December 8, 2006, 06:16
Default Re: How to create a hole on the surface
  #5
nkp
Guest
 
Posts: n/a
Dear,

you create a small cylinder (of hole dia) just above the surface on which u want to create hole.The length of cylinder take very small.Create shell on the surface of the pipe where you want to create hole.Then select the vertices of the bottom of the small cylinder.Project these vertices on the shell using vproj commmand. enjoy
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Iso-surface: How do you create and display? Lukasz Mosakowski FLUENT 5 August 15, 2011 15:08
How to create a circular surface? Jen FLUENT 5 March 8, 2005 20:01
how to create surface mesh in icem5? Pete CFX 3 October 4, 2004 02:42
Create Thin Surface in Mesh2CAD Jeniffer CFX 0 November 4, 2003 18:24
create new surface subhash CD-adapco 2 July 30, 2002 03:53


All times are GMT -4. The time now is 21:59.