CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Boundary Conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 18, 2006, 12:30
Default Boundary Conditions
  #1
James
Guest
 
Posts: n/a
Hi, I am using Star CCM+ to model the air flow through a racing car's airbox (intake system), and would like to know what boundary conditions to use. (1 inlet and 1 outlet)

The flow is compressible (ideal gas), and I have data for pressure, mass flow and velocity at the outlet port.

I have no data for inlet, except that atm pressure is assumed.

If you need any more info let me know, any help would be much appreciated.

Thanks.

  Reply With Quote

Old   November 18, 2006, 15:37
Default Re: Boundary Conditions
  #2
frodo
Guest
 
Posts: n/a
what about trying stagnation pressure ?

outlet boundary is not good for any compressible flow because you leave the code free to set any pressure level. You must fix pressure level somewhere in the domain at a boundary.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Burgerbs equation non constant Boundary Conditions Initial Conditions arkangel OpenFOAM Running, Solving & CFD 1 October 2, 2008 14:48
Boundary conditions for turbulent boundary layer Thomas FLUENT 1 June 17, 2008 05:14
boundary conditions for boundary layer flow A. Al-zoubi CFX 0 November 3, 2007 08:11
Integral boundary conditions turbulent intensitylength boundary conditions olesen OpenFOAM Running, Solving & CFD 0 July 27, 2006 07:18
boundary conditions Jason Jordan FLUENT 0 June 26, 2001 17:12


All times are GMT -4. The time now is 00:44.