CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   ANYBODY works with ES-sofc? (http://www.cfd-online.com/Forums/cd-adapco/55707-anybody-works-es-sofc.html)

josh November 24, 2006 03:04

ANYBODY works with ES-sofc?
 
Hello, this is josh..

Trying to work with customized gird with ES-sofc.

But I can't make the grid fit with es-sofc.

anybody works with es-sofc can help me with making the grid.

If there is, it would be a pleasure.

Thank you


notdiscl November 24, 2006 18:01

Re: ANYBODY works with ES-sofc?
 
for fuel cells simulation it is better to upgrade to star-ccm+, you can build your fuel cell geometry and model easily in star-design and then define reactions, source terms, porous medium, etc...You are using a methodology a bit too old. Ask your support how to download and install stardesign with starccm+. It uses the same license than star-cd.Good luck.

josh November 25, 2006 02:55

Re: ANYBODY works with ES-sofc? *NM*
 

josh November 25, 2006 02:59

Re: ANYBODY works with ES-sofc?
 
Thank you very much.!! I will try star-ccm+


All times are GMT -4. The time now is 22:07.