CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Meshing Errors in Starccm

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 27, 2006, 18:56
Default Meshing Errors in Starccm
  #1
Josh Kempenaar
Guest
 
Posts: n/a
I have imported an iges file into Starccm and set-up the meshing criteria to generate a polyhedral mesh with an extrusion layer. I am using the surface remesher with the surface wrapper and the surface mesh always works and looks pretty good. The surface repair tool finds no problems in any of the cells. Everytime I try to mesh the volume, I get an "Floating Point Exception" error. I don't think the mesh size is an issue because I only have about 1 million cells. I have tried it on different computers and different versions of Starccm, but they all fail to generate the mesh. I tried with much coarser meshes and it still will not mesh.

I am tempted to switch over to do my meshing on gambit because we have a license for fluent as well, but I don't know how well gambit meshes import into Starccm since it is a relatively new capability.
  Reply With Quote

Old   November 28, 2006, 06:06
Default Re: Meshing Errors in Starccm
  #2
William Blake
Guest
 
Posts: n/a
You can import Fuent *.cas files directly into CCM+.

Just contact the support, if you think that there is a bug.
  Reply With Quote

Old   November 30, 2006, 08:14
Default Re: Meshing Errors in Starccm
  #3
Mike Claffey
Guest
 
Posts: n/a
I can confirm that gambit meshes will import into ccm, and I haven't had any problems with them so far.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
starccm+ meshing MAB CD-adapco 4 December 2, 2008 04:09
Gambit Meshing Errors Dan C. FLUENT 1 March 10, 2008 14:32
Meshing errors Vidya Raja FLUENT 2 June 26, 2006 06:44
Errors transferring file from starCD to StarCCM+ AB CD-adapco 1 December 13, 2004 16:26
meshing errors Satish Perivilli CFX 2 June 14, 2004 13:12


All times are GMT -4. The time now is 03:52.