CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

How could I build symmetrical mesh?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 3, 2006, 06:22
Default How could I build symmetrical mesh?
  #1
josephlo
Guest
 
Posts: n/a
I had some trouble. I used pro-modeler to creat the mesh. The model is a sphere in a rectangular. http://www.wretch.cc/album/show.php?...1304924795&p=0 I want to build mesh is symmetrical in right hand side and left side in the sphere. How could I build the symmetrical mesh? (I try to use STAR-CD to use symmetrical boundary condition in the half of the model, but it is not convergence. Because the symmetrical boundary condition must not have a gradient, I am so confused.)

THX
  Reply With Quote

Old   December 9, 2006, 04:47
Default Re: How could I build symmetrical mesh?
  #2
yacine
Guest
 
Posts: n/a
to do that just build the grid for half of the domain then use the star-cd command cvreflect. that will creat an indentical mesh on the second side.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Symmetrical Model With Non Symmetrical Solution jason OpenFOAM Running, Solving & CFD 25 December 18, 2007 03:49
How to build dynamic mesh? arwang FLUENT 2 March 7, 2007 10:19
BUILD MESH: CFX4 RK CFX 0 June 25, 2005 06:12
How to build the mesh Lee CD-adapco 4 October 26, 2004 05:29
CFX 5.6 mesh build shhe CFX 1 February 13, 2004 05:27


All times are GMT -4. The time now is 08:26.