CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

increasing cell size in STAR-CCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 4, 2006, 06:24
Default increasing cell size in STAR-CCM+
  #1
Kasper Skriver
Guest
 
Posts: n/a
Hi

Does anyone know if and how it is possible to have an increasing cell size in one region.

An example could be a pipe where the cell size grows further downstream..

If this isnt possible, can you then think of any alternatives?

Best regards

Kasper Skriver FLSAirtech - Denmark
  Reply With Quote

Old   December 4, 2006, 11:36
Default Re: increasing cell size in STAR-CCM+
  #2
Jamie
Guest
 
Posts: n/a
You can adjust the surface mesh sizes on the individual boundary regions. This would affect the volume mesh size. You also might consider a volume source to increase or decrease the cell size and cell count. (See the help on volume sources, volume shapes.)
  Reply With Quote

Old   December 14, 2006, 04:44
Default Re: increasing cell size in STAR-CCM+
  #3
Kasper Skriver
Guest
 
Posts: n/a
Thanks,

I have done it by the volume source method which is actually quite good. Consulting CD-Adapco gave me the same answer..

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Limit on maximum cell size to minimum cell size ratio albcem OpenFOAM Running, Solving & CFD 2 October 17, 2011 12:00
increasing grid size kcg CD-adapco 5 April 8, 2007 18:26
Increasing mesh size evan FLUENT 0 October 27, 2004 14:22
cell size solomon Main CFD Forum 0 May 17, 2003 13:52
Cell size Julie Polyakh CD-adapco 8 March 22, 2002 12:43


All times are GMT -4. The time now is 15:57.