CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Define sections

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 6, 2006, 13:29
Default Define sections
  #1
Ale
Guest
 
Posts: n/a
Dear all,

I would like to perform integrations and averages on a section of my 3D domain, considering only a subset of the cells cut by the section plane (e.g., I have two coaxial pipes, and I would like to perform the integration only on the inner one and not on the annulus).

Which is the best way to do this in StarCD?

Thank you very much in advance.

Regards,

Ale

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
cp mesurement on different sections of a 3D wing Armin FLUENT 2 May 24, 2015 05:37
Pressure drop between cross sections Mauro Main CFD Forum 0 September 13, 2007 02:09
Sections / Topics in CFD Wiki Roberthealy1 CFD-Wiki 6 August 23, 2007 17:58
Multi sections visulization Jing CD-adapco 3 October 8, 2002 10:21
Modeling Wave Sections J. C. Patrick Main CFD Forum 7 January 22, 2000 14:27


All times are GMT -4. The time now is 06:29.