CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   create a hardcopy of boundaries in batch mode (http://www.cfd-online.com/Forums/cd-adapco/55758-create-hardcopy-boundaries-batch-mode.html)

Fab December 20, 2006 13:33

create a hardcopy of boundaries in batch mode
 
Hi,

I would like to create eps pictures of every boundary condition which exists in my model with a small batch script. Right now, my steps look like: 1) load model 2) go to the 'create boundaries' panel 3) activate the first boundary 4) plot activated region 5) make a eps hardcopy with the name of the boundary ... the same procedure is done for all boundaries. Is there a way to do it with a batch job? I would say, that defining the name of the hardcopy could be the biggest problem!? If that does not work, it would be enough, to assign the region number as eps-file-name.

Greetings! Fabian

Ben December 20, 2006 15:31

Re: create a hardcopy of boundaries in batch mode
 
which product?

Fab December 21, 2006 07:08

Re: create a hardcopy of boundaries in batch mode
 
Hi Ben,

sorry, I forgot to mention: StarCD version 4.0

Thanks! Fab

Vadj December 22, 2006 18:33

Re: create a hardcopy of boundaries in batch mode
 
try the command 'hrsd'


Fab January 8, 2007 05:21

Re: create a hardcopy of boundaries in batch mode
 
Hi Vadj,

thanks for your help! This command creates the images, but how can I automatically find the names of the existing boundaries and display them.

Greetings! Fab


All times are GMT -4. The time now is 14:10.