CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

how to cluster walls

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 25, 2006, 17:42
Default how to cluster walls
  #1
prc
Guest
 
Posts: n/a
Hi: Could anyone one advise me how to non-uniformly cluster wall regions in starcd/prostar if the base grid (unclustered)is already available? That is, I would like to refine only the regions near to the wall. Want to increase the cell size by a factor of 2.All the tutorials in starcd manual talk of cell refinement but only unifomly. Thanks for your suggestions.
  Reply With Quote

Old   December 25, 2006, 18:12
Default Re: how to cluster walls
  #2
Boula!
Guest
 
Posts: n/a
look on the prostar help for

cmroption, crefine, cmrefine

  Reply With Quote

Old   December 26, 2006, 04:56
Default Re: how to cluster walls
  #3
William Blake
Guest
 
Posts: n/a
cmro 1d wall xx

cmre cset

Where xx is the wall region (default = 0) and only the celly at the wall should be in the cset

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Use wall function on some walls (not all walls) Mahdi10 FLUENT 1 February 16, 2009 12:52
Two-sided Walls Jayant FLUENT 1 July 13, 2007 10:56
how to get the centroid of the walls kk FLUENT 0 June 7, 2007 18:13
HTC for low Y+ walls Tang FLUENT 0 March 15, 2007 16:55
too many walls?? matze CD-adapco 2 March 1, 2006 08:13


All times are GMT -4. The time now is 04:52.