CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

smoke (fire simulation)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 5, 2007, 05:48
Default smoke (fire simulation)
  #1
matt
Guest
 
Posts: n/a
hi everyone, I am trying to simulate a fire and instead of simulating combustion, i want to release smoke from a surface. However, i could not find physical properties (density, viscosity, etc.) of smoke. does anyone has a suggestion? My main problem is i dont have necessary hardware (such as enough ram) to simulate combustion nor release number of species (CO, CO2, H2O, soot etc.) from a surface. Instead I am trying to find out what would be the viscosity and density of a typical smoke. Instead of releasing 4-5 different species from a surface, i just want to release air and smoke mixture into air. Since it would be impossible to duplicate chemical combination of a car fire, anything close to it would be enough for me. I hope it is clear. thanx much
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
smoke (fire simulation) matt Phoenics 4 October 23, 2007 01:40
smoke (fire simulation) matt CFX 3 January 5, 2007 10:12
smoke (fire simulation) matt NUMECA 0 January 5, 2007 05:47
smoke (fire simulation) matt Main CFD Forum 0 January 5, 2007 05:45
smoke and fire simulation JJ CD-adapco 3 November 5, 2005 11:54


All times are GMT -4. The time now is 07:54.