CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Mapping and patching boundary conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 5, 2007, 05:13
Default Mapping and patching boundary conditions
  #1
Ale
Guest
 
Posts: n/a
Hi! Is it possible in StarCD to map solution at a boundary of a mesh and patch it at the corresponding boundary of another mesh (e.g., if I split a model in two submodels)? If so, could you please give me some guidelines or tell me where to find information in the manuals?

Thanks a lot!

Ale
  Reply With Quote

Old   January 5, 2007, 07:59
Default Re: Mapping and patching boundary conditions
  #2
TG
Guest
 
Posts: n/a
PMAP
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mapping a boundary condition from file alberto OpenFOAM Running, Solving & CFD 16 May 26, 2009 03:59
Burgerbs equation non constant Boundary Conditions Initial Conditions arkangel OpenFOAM Running, Solving & CFD 1 October 2, 2008 14:48
boundary conditions for boundary layer flow A. Al-zoubi CFX 0 November 3, 2007 08:11
Mapping the boundary condition pialisen FLUENT 2 December 5, 2006 23:23
Integral boundary conditions turbulent intensitylength boundary conditions olesen OpenFOAM Running, Solving & CFD 0 July 27, 2006 07:18


All times are GMT -4. The time now is 08:32.