CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   Modeling of biomass gasification (http://www.cfd-online.com/Forums/cd-adapco/55786-modeling-biomass-gasification.html)

rayy January 12, 2007 15:28

Modeling of biomass gasification
 
Hi everyone, As a new StarCD user, i need your opinion, is it possible to simulate the heat flow within the gasifier during biomass combustion using this software? If it does, how long it will take to complete simulation for 1 gasifier model? Anybody who had experience on similar project, could you help me?? Please give your generous advice!

Thanks

Rayy

stewart January 23, 2007 15:32

Re: Modeling of biomass gasification
 
Sir or Madam,

Yes it is possible. The simulation will take between a few hours and a few days depending on the size of the chamber and what software and hardware you will be using. To learn Star-CD to the point of being able to do the calculation, though, will take some months. FlowTack, LLC could do this calculation for you. Check us out at www.flowtack.com.

Regards,

FlowTack, LLC


All times are GMT -4. The time now is 08:12.