CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Prism layer in Starccm+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 17, 2007, 16:28
Default Prism layer in Starccm+
  #1
Josh
Guest
 
Posts: n/a
In my mesh I have some very small features I am interested in. For example, one part is a fuel nozzle recessed into a vane. Part of the fuel nozzle is in to flow and the other part is mostly out of the flow. This leads to part of the nozzle having high wall y+ values and the other part having low y+ values.

Is there some way to vary the prism layer thickness over the nozzle the complete nozzle has good y+ values?
  Reply With Quote

Old   January 19, 2007, 06:12
Default Re: Prism layer in Starccm+
  #2
Kasper Skriver
Guest
 
Posts: n/a
I think you should split the boundary in two or more seperate boundaries. You can then individually specify prism thickness and amount of layers.

BR Kasper
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
problem in prism layer generation shrimp CFX 5 March 26, 2010 13:34
Prism Layer in STAR-CCM+ Antimony CD-adapco 11 July 2, 2009 06:26
TGridFluent mesh with internal by prism layer and internal face for diagnostic sponiar OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 March 30, 2009 15:02
Prism layer Francesco - University of Florence, Italy CFX 8 May 3, 2008 16:42
problem in convergence with the prism layer genera rakesh CFX 3 September 18, 2006 10:13


All times are GMT -4. The time now is 22:58.