CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Problem while running solver in star4.0 for linux

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 5, 2007, 01:52
Default Problem while running solver in star4.0 for linux
  #1
deisler
Guest
 
Posts: n/a
I am dealing with a problem by using es-ice and prostar in starcd v4 for linux But when I run my solver,it doesnt work. Here is the infomation.

***ERROR*** STAR was not initialized properly on HOST localhost.

==> Please check that you have defined STAR correctly in your initialization files.

How can i modify some parameters for HOST? what are the initialization files (software.ini and hardware.ini)??? how can I modify them?

thx a lot!
  Reply With Quote

Old   March 5, 2007, 15:03
Default Re: Problem while running solver in star4.0 for li
  #2
Ben
Guest
 
Posts: n/a
have a look in the install notes
  Reply With Quote

Old   March 5, 2007, 20:48
Default Re: Problem while running solver in star4.0 for li
  #3
deisler
Guest
 
Posts: n/a
yes,I have had a look at it.But I am 2 new to operate linux.My prostar is ok but solver(star)doesnt work.I dont know where to modify in hardware.ini and software.ini Could you help me?Ben? Thx!!!
  Reply With Quote

Old   March 13, 2007, 00:38
Default Re: Problem while running solver in star4.0 for li
  #4
usker
Guest
 
Posts: n/a
What kind of Linux and Fortran compiler versions do you use?

Regards
  Reply With Quote

Old   March 13, 2007, 07:32
Default Re: Problem while running solver in star4.0 for li
  #5
usker
Guest
 
Posts: n/a
I had the same problem, but I solved it. You just go to STAR folder->bin->STAR. Right click on that file and open Properties. In "Permissions" put the check mark in "Execute". Then try to run Star.

Regards
  Reply With Quote

Old   March 13, 2007, 21:17
Default Re: Problem while running solver in star4.0 for li
  #6
deisler
Guest
 
Posts: n/a
yep,I has modified its properties.The problem has gone but a new one comes out.

linyoo-deisler:~ # star star: Missing command, must specify -x -c -u -r -t -copy -n or -diff.

When I start it in STARLAUNCH, I fails again.

So whats the problems now??? WHY missing command?

  Reply With Quote

Old   March 13, 2007, 22:14
Default Re: Problem while running solver in star4.0 for li
  #7
usker
Guest
 
Posts: n/a
What is your Linux version?
  Reply With Quote

Old   March 14, 2007, 05:16
Default Re: Problem while running solver in star4.0 for li
  #8
deisler
Guest
 
Posts: n/a
SLED 10 SUSE LINUX ENTERPRISE DESKTOP V10 wots the problem? thx
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem when running rhoSonicFoam solver gaottino OpenFOAM Running, Solving & CFD 3 March 1, 2011 05:59
PROBLEM IN SOLVER RUNNING PARALLEL Íñigo CFX 3 February 4, 2007 06:08
problem running the solver chotet CFX 1 January 17, 2007 04:59
Gambit error when running under Linux 10.0 Ralf Schmidt FLUENT 0 July 19, 2006 09:00
Problem in running CFX in red hat linux Q CFX 0 March 30, 2006 09:11


All times are GMT -4. The time now is 14:25.