CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

pressure boundary

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 15, 2007, 17:07
Default pressure boundary
  #1
thomas
Guest
 
Posts: n/a
Hello, I am trying to run a combustion model inside a tube with two small inlets (air\fuel) and and outlet. When i was using a standard outlet boundary the code stopped due to negative velocities. Then I changed to pressure boundary. Initialy i had the pressure reference cell at the inlet, because there I know the temperature. I specified atmospheric pressure. Since I do not know the pressure drop, i changed the reference cell to one in the pressure boundary. However there I don't now the temperature.

Has anybody got any ideas?

thanks,

thomas
  Reply With Quote

Old   March 20, 2007, 06:00
Default Re: pressure boundary
  #2
sidd
Guest
 
Posts: n/a
For models with pressure boundary, do you really need to know the pressure at the pressure reference cell?

I'm not sure, but i think you can set your pressure reference cell at the pressure boundary and run your calculation.
  Reply With Quote

Old   March 21, 2007, 05:55
Default Re: pressure boundary
  #3
Anton Lyaskin
Guest
 
Posts: n/a
For models with pressure boundary it doesn't matter where you set your pressure reference cell. Reference temperature is not associated with pressure reference cell. However to set up pressure boundary you do need to know pressure on it! So may be in your case it's better to stay with outlet boundary but extend the domain.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressure boundary Paris Hdez CD-adapco 0 March 13, 2006 06:04
Pressure Boundary saang CD-adapco 2 April 28, 2005 06:57
pressure boundary VS. mass flow boundary dalton Main CFD Forum 12 April 3, 2005 23:52
boundary pressure Niru Main CFD Forum 0 June 10, 2003 02:37
Pressure Boundary Antonio Retaggio CD-adapco 0 September 6, 2001 12:02


All times are GMT -4. The time now is 04:52.