CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Weghted averages along lines

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 17, 2007, 03:26
Default Weghted averages along lines
  #1
Ale
Guest
 
Posts: n/a
Hi,

I would like to compute mass-weighted averages and area-weighted averages along lines (e.g. arcs, or straight lines) laying on a section which is not oriented as the grid, so that the section cuts several layers of exahedral cells.

Could you please tell me what's the most efficent way to do that in StarCD, or suggest a postprocessing software that could do that?

Thank you very much indeed.

Regards,

Ale

  Reply With Quote

Old   April 19, 2007, 12:03
Default Re: Weghted averages along lines
  #2
ping
Guest
 
Posts: n/a
You can do this in proSTAR:

1. create some shell cells where you want the results - e.g. create a spline where you want the results, loop over its v's to create line cells, then extrude these into a thin line of shells.

2. load your results into the fluid cell post registers and do any calc OPERATIONS to mass average or whatever.

3. map these results onto the shell cells using command PMAP (you could alternatively also put lots of vertices evenly along the spline and map into these - depends what you really want)

4. CSET the shells or v's and plot or SUMM or whatever
  Reply With Quote

Old   April 20, 2007, 03:36
Default Re: Weghted averages along lines
  #3
Ale
Guest
 
Posts: n/a
Thank you Ping, I will try this way.

Regards,

Ale
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Averages in an homogeneous direction luiz OpenFOAM Post-Processing 5 May 12, 2008 07:51
Weighted Averages Disagree Ryan FLUENT 3 February 8, 2008 16:55
Radial averages smillerhh FLUENT 1 November 8, 2006 08:54
Problem with integrals and averages if backflow?? Amit FLUENT 0 October 19, 2006 18:54
cicumferential averages vaishali FLUENT 0 August 13, 2006 13:21


All times are GMT -4. The time now is 02:24.