CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

IC engine Spray-EBU combustion model problems

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 14, 2007, 05:45
Default IC engine Spray-EBU combustion model problems
  #1
deisler
Guest
 
Posts: n/a
I set up an IC engine combustion chamber model with a C12H26-L nozzel. The Spray works well. When I config the chemical-reaction model,Star-cd automatically creates scalars C12H26,mix,O2,N2,RAC-1,Rac-2,Rac-3 etc. The problem is Mix,Rac-1-2-3 do not appear in the combustion chamber,so the ignition do not run in the 50th step. I confirm that I have set these scalars as "Post",But I dont know why they do not come out in the chamber.

Could anybody help me? thanks a lot.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems when I mesh my engine model. deisler CD-adapco 3 March 22, 2007 22:58
turbulence model in internal combustion engine George Main CFD Forum 0 December 4, 2006 19:01
diesel engine spray and combustion usker CD-adapco 6 April 24, 2006 22:36
Spray and combustion model for alternative fuel Torn Main CFD Forum 3 November 12, 2003 05:05
Using Fluent6.1 to model engine combustion Allanhill FLUENT 1 June 15, 2003 04:36


All times are GMT -4. The time now is 14:42.