CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   Time table in STAR-CCM+ ??? (http://www.cfd-online.com/Forums/cd-adapco/56059-time-table-star-ccm.html)

Nari May 14, 2007 16:39

Time table in STAR-CCM+ ???
 
Hi everybody.. in STAR-CCM+ I have tried to simulate stagnation boundary changes according to time. I have prepared .csv, .xy file as said in user manual.

Time Pressure 0.00001 640000 0.00002 835000 ... ... (only for example. initial values (for t=0) are 0 Pa. it was considered in initial conditions )

i read this table in STAR-CCM+ and also schemed this table as Time (X values) - Pressure (Y values)

but after initialization there was error as below: Non-existent dataname in Table.

Please help me, if there are any missing datas. Thanks already...

thomas May 31, 2007 05:14

Re: Time table in STAR-CCM+ ???
 
This is part of a table (.tab) I used for transient inlet conditions (massflow):

{'Type': 'time'

'DataSets': ['time' 'massflow3']

'time': [ 0.00001 0.00002 0.00003 ]

'massflow3': [ 0.04 0.05 0.06 ] }

I hope it helps! thomas



All times are GMT -4. The time now is 01:06.