CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Time table in STAR-CCM+ ???

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 14, 2007, 16:39
Default Time table in STAR-CCM+ ???
  #1
Nari
Guest
 
Posts: n/a
Hi everybody.. in STAR-CCM+ I have tried to simulate stagnation boundary changes according to time. I have prepared .csv, .xy file as said in user manual.

Time Pressure 0.00001 640000 0.00002 835000 ... ... (only for example. initial values (for t=0) are 0 Pa. it was considered in initial conditions )

i read this table in STAR-CCM+ and also schemed this table as Time (X values) - Pressure (Y values)

but after initialization there was error as below: Non-existent dataname in Table.

Please help me, if there are any missing datas. Thanks already...
  Reply With Quote

Old   May 31, 2007, 05:14
Default Re: Time table in STAR-CCM+ ???
  #2
thomas
Guest
 
Posts: n/a
This is part of a table (.tab) I used for transient inlet conditions (massflow):

{'Type': 'time'

'DataSets': ['time' 'massflow3']

'time': [ 0.00001 0.00002 0.00003 ]

'massflow3': [ 0.04 0.05 0.06 ] }

I hope it helps! thomas

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inlet table in STAR-CD Sachin CD-adapco 1 March 26, 2008 11:22
How to reduce star/kinetics computation time vigorzxy CD-adapco 0 May 9, 2005 12:29
RGP table Atit Koonsrisuk CFX 1 January 10, 2004 12:14
use table Moon CD-adapco 6 September 18, 2003 08:58


All times are GMT -4. The time now is 21:19.