CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Meshing Problem Proam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 2, 2007, 13:03
Default Meshing Problem Proam
  #1
Phil
Guest
 
Posts: n/a
Hallo,

I have a shell area, and another shell area around the first one. They are not connected with each other. I want to have a third shell-area between the first and second one, the whole area then should be closed, but I need three different cell types. Can anybody help me realizing this with prostar or proam?

Thanks a lot!

Phil

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PROAM: Problem in mesh generation Bala Siemens 0 March 5, 2008 06:53
proam tetfix problem tom Siemens 1 March 15, 2007 18:02
proam -subsurface meshing tak Siemens 3 December 30, 2004 11:23
ProAm meshing...Doubt Antony Siemens 5 July 26, 2004 06:31
Problem with proam Mir Siemens 2 March 26, 2002 05:54


All times are GMT -4. The time now is 16:41.