CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   Vehicle CAD Model Meshing (http://www.cfd-online.com/Forums/cd-adapco/56106-vehicle-cad-model-meshing.html)

B Bru June 4, 2007 16:26

Vehicle CAD Model Meshing
 
I am about to attempt to mesh a car that was designed in Solidworks. I plan on exporting the vehicle CAD files as .stl.

My questions:

1) There are many parts that are under the body of the car and do not need to be included in the analysis. Should I just suppress these, or when I when I use pro-surf can I just select the surfaces I want to be included in the surface mesh?

2) The body is made of panels that DO NOT form a continous surface. They have design clearances in them so they fit together easy. The clearance is about 1mm between the panels. How is pro-surf going to handle this? Can they be stitched together for the analysis? It seems like this kind of discontinuity probably will cause issues unless there is a built in way to deal with them up front.

Thanks in advance to anybody who replys!

Ben June 4, 2007 17:06

Re: Vehicle CAD Model Meshing
 
use the surface wrapper not pro-surf

B Bru June 4, 2007 17:44

Re: Vehicle CAD Model Meshing
 
Thanks Ben, I've never heard of that utility. Is that something I would find within Pro-Star?

Airfoil June 6, 2007 00:39

Re: Vehicle CAD Model Meshing
 
It is in the Proam. It is located at Proam -> Prepare Surfaces -> Create New Surfaces -> Surface Wrapper

B Bru June 7, 2007 12:47

Re: Vehicle CAD Model Meshing
 
Thanks Airfoild. This will make my life a lot easier:)

Nari June 8, 2007 17:30

Re: Vehicle CAD Model Meshing
 
Use STAR-CCM+ wrapper option.. it is very easy than proam wrapper..

if you use STAR-CD V.4 you can transfer your volume mesh from STAR-CCM+ to STAR-CD v.4... as *.ccm file..

Else if you use STAR-CD v.3.2x you can transfer your surface mesh..


All times are GMT -4. The time now is 22:43.