CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   Simulation of pollutant dispersion in a city (http://www.cfd-online.com/Forums/cd-adapco/56155-simulation-pollutant-dispersion-city.html)

George June 26, 2007 11:35

Simulation of pollutant dispersion in a city
 
Dear all,

I have some questions (problems) about STAR-CD concerning the simulation of dispersion in an urban city. More specific I have created the computational domain, boundaries (wall inlet etc) and my purpose is to create "something" which can simulate a pollutant from a point source. The position of source is on the ground so I thought to define a cell face as inlet of pollutant. Is this correct or STAR-CD can simulate point sources? Then additional scalar for pollutant was the next step (pollutant was AIR). I gave a velocity in boundary conditions for pollutant and mass fraction in the inlet of pollutant. Do you know what is the purpose of mass diffusivities and Schmidt number and if I have to change them according to the kind of pollutant? Do you know what else do I need to simulate dispersion of pollutants? Thank you very much in advance.

Best regards George

Mclaren June 27, 2007 04:26

Re: Simulation of pollutant dispersion in a city
 
calculating a steady problem is ok 1.city surrounding without polluted air 2.on the base of problem 1 flow field, added passive scalar at the point source 3.on the base of problem 1 flow field, added activeive scalar at the point source

thats all



All times are GMT -4. The time now is 20:27.