CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

AMG troubles - help?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 21, 2007, 04:37
Default AMG troubles - help?
  #1
Stephanie
Guest
 
Posts: n/a
I started a parallel calculation with AMG. After 60 iterations the job is killed. Error message is following:

Process 1 amg_error: amg_trunc : error (1) occurred ierr_amg= 2981 Please contact CD-adapco support. STAR MPI_ABORT executed from processor 1

For an another mesh (same geometry ans settings) the job run until convergence.

What is the problem?

Thanks for your help.
  Reply With Quote

Old   September 22, 2007, 15:03
Default Re: AMG troubles - help?
  #2
Donald
Guest
 
Posts: n/a
try CG algorithm. If it works, it means the AMG solver diverges.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Troubles with the dpm model Marco Antonelli FLUENT 10 December 7, 2010 10:18
setup troubles maxim FloEFD, FloWorks & FloTHERM 0 March 4, 2009 10:46
UDF troubles Rachel FLUENT 1 June 30, 2008 00:02
3d VOF troubles... Mac FLUENT 0 March 12, 2007 09:41
some video troubles... giosue Siemens 2 February 19, 2003 11:03


All times are GMT -4. The time now is 04:06.