CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

negative volume found in es-ice mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 1, 2007, 10:18
Default negative volume found in es-ice mesh
  #1
lizhihua
Guest
 
Posts: n/a
Hi all,

I have been working on a gasoline engine model with es-ice.The chamber has a spherical dome with valve seats extruding from the side where negative volume cells are found at some crank angles.

When the result at a certain crank angle is created with the "interpolate" button on(no information about it in the tutorial), no negative volume is found and the mesh always has a good quality.However,this mesh still fails the test of starCD.

Could anybody tell me how to generate (mapping method)a mesh with extruding valve seat and eliminate the negative volume cells?Or are there any button to turn on in es-ice or starcd and activate the interpolated results?

Many thanks!
  Reply With Quote

Old   August 4, 2007, 04:39
Default Re: negative volume found in es-ice mesh
  #2
Peter
Guest
 
Posts: n/a
I have only read the first paragraph, but that is sufficient. You are not the first engineer with this issue.

For specialist tools like this call adapco.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Negative Volume in Mesh by Gridgen James FLUENT 5 February 3, 2010 08:34
Negative Volume Mesh MANOJKUMAR FLUENT 8 April 7, 2009 09:50
FSI & Negative Volume Mesh Mojtaba CFX 1 October 13, 2008 07:13
Negative volume in dynamic mesh Max FLUENT 1 August 7, 2006 05:18
Dynamic Mesh, negative volume! ROOZBEH FLUENT 2 June 22, 2006 20:51


All times are GMT -4. The time now is 14:57.