CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Fuel Injection Problems.....

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 7, 2007, 12:40
Default Fuel Injection Problems.....
  #1
Maria
Guest
 
Posts: n/a
Hi all... My name is maria and I have just started using STAR-CD. I am trying to set up a transient diesel injection case without evaporation using the huh atomisation model with variable flow rate and droplet breakup. All residuals are decreasing (of the order E-02) however the mass residual is either fluctuating very close to 1 or increasing. Does anyone have any suggestions...? thanks....
  Reply With Quote

Old   August 25, 2007, 09:02
Default Re: Fuel Injection Problems.....
  #2
Andrea
Guest
 
Posts: n/a
I don't understand the problem...you're running a transient simulation of an injection inside a chamber...and the residual of the computation don't go to "0" is it? Since it's a transient computation I think it's normal...am I wrong??? (I've just started too...)
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
fuel injection Johannes P. CD-adapco 6 February 19, 2009 09:45
Fuel injection Rams FLUENT 12 June 20, 2006 01:25
liquid-fuel-injection abel FLUENT 2 May 2, 2005 10:39
injection of fuel into tank filled with fuel mujahid FLUENT 1 February 19, 2004 07:36
Fuel injection Enrico CD-adapco 2 December 23, 1999 04:37


All times are GMT -4. The time now is 12:30.