CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

High Temperatures during compression

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 28, 2007, 08:18
Default High Temperatures during compression
  #1
John
Guest
 
Posts: n/a
Hello During the simulation of a compression stroke (RPM:3000/min, dp=4000bar) the resulting temperatures seem too high to me (dT=150K, static enthalpy,thermal). The temperature change should be in the range of 50K. In the Infol file the following warning appears:

*** WARNING #047 *** CONVERGENCE OF ENTHALPY TO TEMPERATURE NOT ACHIEVED AT 106159 CELLS.

MAXIMUM DIFFERENCE OF 0.266E+01 AT CELL 8272 Has anybody an advice for me?

Thanks John

  Reply With Quote

Old   August 28, 2007, 09:42
Default Re: High Temperatures during compression
  #2
John
Guest
 
Posts: n/a
I am using the following specht.f-user-coding:

CP=(0.0032 * T) * 1000

RETURN

END

  Reply With Quote

Old   August 29, 2007, 03:42
Default Re: High Temperatures during compression
  #3
Denizen
Guest
 
Posts: n/a
use CONVTE.F subroutine h(t) user coding. Set H and DH/DT
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
zero temperatures Georg CFX 1 December 1, 2008 17:19
Pressure during compression gets too high A Student CD-adapco 5 July 2, 2007 07:28
abnormally high flame temperatures in C2H2/Air com Victor FLUENT 3 May 7, 2007 18:00
Constant Heat Flux / Temperatures too high Didio FLUENT 3 February 17, 2006 13:07
Compressible vs. incompressible NS at high Temperatures Jean Lacroix Main CFD Forum 1 December 24, 1999 07:21


All times are GMT -4. The time now is 18:40.