CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

EMERGENCY HELP ME NEGATIVE DENSITY IN ES-ICE

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 10, 2007, 16:42
Default EMERGENCY HELP ME NEGATIVE DENSITY IN ES-ICE
  #1
emir aydar
Guest
 
Posts: n/a
i made my model in es-ice,i used trimmed cell and there wasnt any negative volume cell then i imported my model into prostar, i gave required values in prostar and finally i wrote star -dp and i launched analysis ,iterations were going but after 80 iteration prostar stopped and it said there were more than 100 negative volume cells what will i do? what should i do? help meeeeeee
  Reply With Quote

Old   October 10, 2007, 18:13
Default Re: EMERGENCY HELP ME NEGATIVE DENSITY IN ES-ICE
  #2
Bee
Guest
 
Posts: n/a
have you attended the spray and combustion and moving mesh training course? Most of the answers are there.

cd-adapco also have a knowledge base in the site where you download the software, most of the answers are there as well. You can search the knowledge base to have the answers. You need to ask your account manager to enable you access.

good luck

bee
  Reply With Quote

Old   October 10, 2007, 19:31
Default Re: EMERGENCY HELP ME NEGATIVE DENSITY IN ES-ICE
  #3
Pauli
Guest
 
Posts: n/a
Sounds like you have a problem with the grid motion.

Remote diagnosis is rather difficult.
  Reply With Quote

Old   October 12, 2007, 15:21
Default Re: EMERGENCY HELP ME NEGATIVE DENSITY IN ES-ICE
  #4
emir aydar
Guest
 
Posts: n/a
i think i have internal face around the port there are couples face i tried to delete inter face by cp match but it wouldnt be succesful also i tried to delete in proam but it wouldsnt be succesful either
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Negative density Gopi CD-adapco 0 April 3, 2007 06:49
negative density novice CD-adapco 1 March 15, 2005 09:27
Negative Density Wendy Tjia CD-adapco 6 November 26, 2004 10:45
negative density Jane CD-adapco 4 March 9, 2004 21:01
Negative Density Sangwon Kim CD-adapco 20 May 8, 2001 08:49


All times are GMT -4. The time now is 14:16.