CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   Volume mesh problem in STARDESIGN (http://www.cfd-online.com/Forums/cd-adapco/56316-volume-mesh-problem-stardesign.html)

Jaedal October 13, 2007 00:48

Volume mesh problem in STARDESIGN
 
Hello!

I faced a critical problem when I used STARDESING. After making geometry and surface meshes, I got the following error message making volume meshes:

1)Error: Tried to execute: /opt/starcd/v3.26/PROSTAR/3.26.003/linux_2.4-x86-glibc_2.3.2/bin/ammbatch

2) System error message: Operation not permitted Error: Subsurface generation failed: please look at the procadmesh.log file in the directory: tmp_stardesign

I have no idea of this. Woruld you give me a direction to solve this error?

Have a nice day!


ping October 16, 2007 03:54

Re: Volume mesh problem in STARDESIGN
 
Do as the message says and read the log file(s) - it will usually give you additional information like a self-intersection error.

Try loading the surface file into proam (open the .dbs file) and do a surface check.

Then go back to your CAD in STAR-Design and make some changes locally where the problem was located - change the geom, locally refine the mesh size etc.

Jaedal October 17, 2007 09:23

Re: Volume mesh problem in STARDESIGN
 
In my case, surface meshes are well generated. The problem is the volume meshes. Are there any "ammbatch" problem and STARDESIGN version problem?


All times are GMT -4. The time now is 16:05.