CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

Volume mesh problem in STARDESIGN

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   October 13, 2007, 00:48
Default Volume mesh problem in STARDESIGN
Posts: n/a

I faced a critical problem when I used STARDESING. After making geometry and surface meshes, I got the following error message making volume meshes:

1)Error: Tried to execute: /opt/starcd/v3.26/PROSTAR/3.26.003/linux_2.4-x86-glibc_2.3.2/bin/ammbatch

2) System error message: Operation not permitted Error: Subsurface generation failed: please look at the procadmesh.log file in the directory: tmp_stardesign

I have no idea of this. Woruld you give me a direction to solve this error?

Have a nice day!

  Reply With Quote

Old   October 16, 2007, 03:54
Default Re: Volume mesh problem in STARDESIGN
Posts: n/a
Do as the message says and read the log file(s) - it will usually give you additional information like a self-intersection error.

Try loading the surface file into proam (open the .dbs file) and do a surface check.

Then go back to your CAD in STAR-Design and make some changes locally where the problem was located - change the geom, locally refine the mesh size etc.
  Reply With Quote

Old   October 17, 2007, 09:23
Default Re: Volume mesh problem in STARDESIGN
Posts: n/a
In my case, surface meshes are well generated. The problem is the volume meshes. Are there any "ammbatch" problem and STARDESIGN version problem?
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
problem on volume mesh wan CFX 0 January 29, 2008 03:41
Help! i need help Mesh volume problem Sergi CFX 1 February 1, 2006 17:29
error during generate mesh in stardesign xhliu1 CD-adapco 1 July 29, 2005 08:59
Mesh in stardesign to starcd! xhliu1 CD-adapco 2 July 6, 2005 23:06
transfer mesh in stardesign to starcd xhliu1 CD-adapco 1 June 19, 2005 03:35

All times are GMT -4. The time now is 17:53.