|
[Sponsors] |
November 9, 2007, 04:46 |
About boundary contitions
|
#1 |
Guest
Posts: n/a
|
Hi, can anybody help me with my question: there are two big pools and pump transfering liquid between them. See http://www.jinr.ru/~akarak/toROT.png We solve (using STAR-CD) simple problem (pump without pools) instead of full one. Can anybody say, what boundary conditions are correct in this case?
Thanks. |
|
November 10, 2007, 21:13 |
Re: About boundary contitions
|
#2 |
Guest
Posts: n/a
|
I guess you need to find the pressure and flow rate of the liquid at the inlet of the pump based on the liquid level and inlet surface area, etc... and the outlet should be "flow split outlet".
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Boundary conditions for turbulent boundary layer | Thomas | FLUENT | 1 | June 17, 2008 05:14 |
boundary conditions for boundary layer flow | A. Al-zoubi | CFX | 0 | November 3, 2007 07:11 |
Slip Boundary Condition for Moving Boundary | Shukla | Main CFD Forum | 3 | November 11, 2005 15:02 |
pressure boundary VS. mass flow boundary | dalton | Main CFD Forum | 12 | April 3, 2005 23:52 |
Immersed boundary boundary treatment | AFP | Main CFD Forum | 0 | January 30, 2004 07:16 |