CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

CCM+Multiphase problem with Cylindric coordinates

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 18, 2007, 22:59
Default CCM+Multiphase problem with Cylindric coordinates
  #1
S.B
Guest
 
Posts: n/a
Hello

I want to create a two-phse model. It ought to be a bubble (alveole) filled with air and an film (surfactant) which wets the whole insidewall from this bubble. The thickniss of this filmms is 0,00014. My problem is to define the two phases. Maybe there is a possibility to define a field function where I can enter the radius from the face Interface ?!

Greetings

Steffi
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF Wall Temperature Problem - Coordinates Marc FLUENT 1 July 3, 2008 11:10
Problem with the cylindrical coordinates langloi OpenFOAM Running, Solving & CFD 0 December 9, 2005 23:26
multiphase problem Mike CFX 1 May 13, 2005 03:22
where to get source code for cfd cylindric S D Ding Main CFD Forum 0 July 26, 2002 00:22
The center on cylindric 2d model S.H. Lee Main CFD Forum 0 May 15, 2002 23:27


All times are GMT -4. The time now is 09:15.