CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

face number

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 13, 2008, 10:53
Default face number
  #1
c0384
Guest
 
Posts: n/a
Hi

I created my model in Gridgen and then imported them into starCD. When I display the face number, I found that face number of the meshes that I created in Gridgen is not consistent throughout my model. What I mean by not consistent is that for example, I want the cell face at the outlet boundary equal to 3, but the it turn out to be a mixing of 3, 4 or 5.

Is it possible for me to renumber the face number in StarCD or Gridgen if starCD fails to do that?

Thank in advance
  Reply With Quote

Old   January 13, 2008, 12:48
Default Re: face number
  #2
BastiL
Guest
 
Posts: n/a
As far as I know this will be difficult in STAR. I do not know gridgen.

Why do you need this face numbering?
  Reply With Quote

Old   January 14, 2008, 08:50
Default Re: face number
  #3
James
Guest
 
Posts: n/a
Depending on the topology of the hexes you might get CDIVIDE (1 1 1) to work (use CDIR first), I forget if there is a vertex only version of this that can do it without without creating new cells.

An alternative would be to CFIND shells onto the surface and extrude a layer, if the geometry permits. These should have consistent face numbers normal to the boundary.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Face number in ICEM Jonathan Lemay CFX 3 June 27, 2013 06:00
Face loop in a face thread Dario FLUENT 2 March 13, 2007 06:14
i want to select the the cell face with number 'f5 dpshaka CD-adapco 1 November 9, 2005 05:53
identification of a face number Andrew Garrard FLUENT 0 November 27, 2003 06:38
Ratio of Reynould Number and Froude Number CFD MAN Main CFD Forum 2 August 23, 2002 20:01


All times are GMT -4. The time now is 12:59.