CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Initialisation in transient simulation with ASIs

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 29, 2008, 13:12
Default Initialisation in transient simulation with ASIs
  #1
Phil D
Guest
 
Posts: n/a
Hi,

I have a serious problem in setting up a transient simulation including ASIs with my state-state solution as the restart pst-file. For my steady-state calculation I had to connect (couple) the cell faces at the sliding interface (and delete the ASIs). The result is fine but it does not work as initialisation of my transient simulation.

Does anyone know why? Is there anything else I have to consider?

Thanks in advance,

Phil D
  Reply With Quote

Old   January 29, 2008, 15:26
Default Re: Initialisation in transient simulation with AS
  #2
Balduin Bankerotti
Guest
 
Posts: n/a
Just do an smap.
  Reply With Quote

Old   January 29, 2008, 17:25
Default Re: Initialisation in transient simulation with AS
  #3
James
Guest
 
Posts: n/a
The flow is held in the reference frame of the fluid, not the absolute reference frame. The pressure and all scalar fields should be fine.

You therefore need to get the velocities in the global reference frame and then push them back onto the post file before SMAPping. UPDATE or operate putc should probably work.

I would advise taking a copy of the post file first as this may take a couple of tries! Once you have figured out the commands it is pretty easy.
  Reply With Quote

Old   January 29, 2008, 19:14
Default Re: Initialisation in transient simulation with AS
  #4
Philipp Daus
Guest
 
Posts: n/a
Ok thanks, this sounds like an useful approach.

Starting my transient simulation I got this error message: __________________________________________________ ___________ *** READ RESTART FIELD FROM FILE turbine_neu.pst **ERROR - READING POST FILE:

ND1 / ND2 Error FB IN R9SF1 : DIMENSION ERROR __________________________________________________ ___________ Any idea? Does this match your approach?

Thanks again!
  Reply With Quote

Old   January 29, 2008, 19:32
Default Re: Initialisation in transient simulation with AS
  #5
Balduin Bankerotti
Guest
 
Posts: n/a
This was the case in version 2.1 of starcd

Now it is possible to do the smap without dealing with absolute or relative velocities.

  Reply With Quote

Old   January 29, 2008, 19:35
Default Re: Initialisation in transient simulation with AS
  #6
Balduin Bankerotti
Guest
 
Posts: n/a
You try an restart run, which will not work.

You have to do a "rdat init c" to read the smap file.
  Reply With Quote

Old   January 30, 2008, 04:11
Default Re: Initialisation in transient simulation with AS
  #7
Philipp Daus
Guest
 
Posts: n/a
I am working with version 3.26

  Reply With Quote

Old   January 30, 2008, 08:44
Default Re: Initialisation in transient simulation with AS
  #8
James
Guest
 
Posts: n/a
That was probably about the time I last tried it ! Isn't progress great.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Transient simulation Pramila Main CFD Forum 2 October 1, 2010 05:01
Transient simulation astro1 FLUENT 0 October 22, 2006 11:28
Transient simulation Cathy Lee FLUENT 0 August 30, 2005 15:40
Anyone use RSM in transient simulation? Pete Main CFD Forum 0 March 13, 2005 04:29
is this a transient simulation? Joana Main CFD Forum 7 March 11, 2005 15:41


All times are GMT -4. The time now is 07:40.