CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

post process to get an arbitrary face data

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 27, 2008, 01:22
Default post process to get an arbitrary face data
  #1
oniboy
Guest
 
Posts: n/a
Good day. I want to use post register operation to get data, and I ran a simple case about two metal layer pure conduction. The goal is temperature data distribution in the interface, so I set a shell on the interface.

I clicked the fuction button=> load boundary data => temperature=> got vales in column register 4. My question is.. Can I specify "one" boundary and only get this boundary region data?

And after I did steps described above, three another shell appeared in the cell table, symmentry shell, wall shell, nonwall shell, respectively. However, I checked the cell numbers corresponding to register4 in the register list, they are cell numbers of symmentry shell in the cell list.

I am very confusing because the three shells does not really exist.

How can I get the temperature in the interface ??

  Reply With Quote

Old   February 27, 2008, 12:44
Default Re: post process to get an arbitrary face data
  #2
Jim
Guest
 
Posts: n/a
bset news regi xxx vset news bset cset news vset all wplo

  Reply With Quote

Old   February 28, 2008, 23:12
Default Re: post process to get an arbitrary face data
  #3
oniboy
Guest
 
Posts: n/a
Thank you so much sir..

I think I got the tip to specify the vertex..

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[OpenFOAM] How to create an contour plot for arbitrary plane with interpolated data navaladi ParaView 0 June 4, 2008 08:57
Need a post-process software Munikrishna Main CFD Forum 3 November 27, 2006 14:45
how to post process with visual3 dell Siemens 2 December 17, 2002 02:59
Post-process: how to extract Graph Registers' data Jiaying Xu Siemens 11 July 17, 2002 05:38
200 data files to post process (how?) Mark R FLUENT 1 August 9, 2001 14:35


All times are GMT -4. The time now is 10:11.