CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

CCM+: Surface Wrapping Tutorial

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 14, 2008, 17:07
Default CCM+: Surface Wrapping Tutorial
  #1
Peter Specht
Guest
 
Posts: n/a
Hi, has anybody seen a tutorial or something like that to test how the surface wrapper is working? Strange to have such an nice feature but no chance to test it without reading the tutorial guide (hard work).

Regards Peter
  Reply With Quote

Old   February 14, 2008, 17:50
Default Re: CCM+: Surface Wrapping Tutorial
  #2
Jim
Guest
 
Posts: n/a
CD-adapco are hammering on about the wrapper fairly hard at the moment so I reckon if you were to e-mail them they should be able to send you one.
  Reply With Quote

Old   February 15, 2008, 04:29
Default Re: CCM+: Surface Wrapping Tutorial
  #3
Peter Specht
Guest
 
Posts: n/a
CD-adapco Germany has no tutorial for s. w.
  Reply With Quote

Old   February 15, 2008, 05:38
Default Re: CCM+: Surface Wrapping Tutorial
  #4
Peter Specht
Guest
 
Posts: n/a
CD-adapco UK has one - strange?!
  Reply With Quote

Old   February 15, 2008, 06:17
Default Re: CCM+: Surface Wrapping Tutorial
  #5
Steve
Guest
 
Posts: n/a
This is probably because the suface wrapper is developed in the UK.
  Reply With Quote

Old   February 15, 2008, 08:58
Default Re: CCM+: Surface Wrapping Tutorial
  #6
TG
Guest
 
Posts: n/a
No it was developed in the US where all the meshing products have been developed.
  Reply With Quote

Old   February 15, 2008, 15:30
Default Re: CCM+: Surface Wrapping Tutorial
  #7
www.cd-adapco.com
Guest
 
Posts: n/a
CD-adapco (in Germany, the UK, the US) have surface wrapping tutorials, you just need to ask the support team. There is certainly one based around this demo:

http://www10.mcadcafe.com/link/displ...?link_id=22857

To be honest, the surface wrapper is simple enough that you can start using it on your own geometries without too much difficulty

Stephen\
  Reply With Quote

Old   February 16, 2008, 12:13
Default Re: CCM+: Surface Wrapping Tutorial
  #8
Peter Specht
Guest
 
Posts: n/a
To be honest, the surface wrapper is very complex. But in the next Version (3.xx) is a tutorial in the user guide. I have it now. To be honest: very, very complex but fantastic. Fluent (Ansys) should put on warm clothes ;-)

Peter
  Reply With Quote

Old   February 16, 2008, 12:31
Default Re: CCM+: Surface Wrapping Tutorial
  #9
Pauli
Guest
 
Posts: n/a
What is obvious to some is baffling to others.
  Reply With Quote

Old   March 13, 2008, 11:11
Default Re: CCM+: Surface Wrapping Tutorial
  #10
BastiL
Guest
 
Posts: n/a
> Fluent (Ansys) should put on warm clothes ;-)

Really? I know both of the wrappers, ccm+ up to v2.08 and FLUENT (TGrid 5.0) and in my eyes there is no doubt about that Fluent has the better one....

Regards
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
tutorial : free surface flow over a bump HAYATE CFX 1 December 18, 2007 17:11
surface wrapping takes forever Kiran CD-adapco 3 October 13, 2006 13:01
Surface Chemistry Tutorial Claud FLUENT 1 April 24, 2006 19:00


All times are GMT -4. The time now is 05:21.