CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Question about the resistance in fixed temperature

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 29, 2008, 00:00
Default Question about the resistance in fixed temperature
  #1
oniboy
Guest
 
Posts: n/a
Hi all

I have a question about the wall boundary and read the manual and it's not so clear. What's the real meaning about the resistance?? Does it simulate a layer of solid without creating actual solid grids? so the value based on the thickness and conductivity of the solid layer? or it simulates the fouling resistance and contact resistance?

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fixed Temperature in StarCCM+ Oliver CD-adapco 4 September 8, 2008 07:22
ask a question about Fixed Flux Boundary Condition mahe Phoenics 1 July 15, 2008 04:21
question about a temperature dependent HTC Christoph Ley Phoenics 2 June 5, 2008 09:05
Question on Face Temperature Gradient Tomasz Didenko FLUENT 1 June 27, 2003 04:30
question on cyclic B.C. for temperature Jiaying Xu CD-adapco 1 February 27, 2003 07:13


All times are GMT -4. The time now is 15:10.