CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

error in cyclic boundaries match

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 29, 2008, 10:51
Default error in cyclic boundaries match
  #1
Steve
Guest
 
Posts: n/a
I have problem in making the match of cyclic boundaries.If i select only one cell of a cyclic boundary with the corresponding cell of the other cyclic boundary it makes me the match, but for more than one cells, the next error appears "the following multiple boundaries all share identical locations and will not be mached", any propose what the error about is?
  Reply With Quote

Old   February 29, 2008, 15:54
Default Re: error in cyclic boundaries match
  #2
James
Guest
 
Posts: n/a
Your matching tolerance would appear to be too large in CYMATCH or CYARBIT.

Is the model in meters with very small cells? One possible fix is to move it to mm alternatively change the tolerance on the match command.
  Reply With Quote

Old   March 4, 2008, 05:32
Default Re: error in cyclic boundaries match
  #3
Steve
Guest
 
Posts: n/a
my problem is in mm, unfortunately it doesnt seem to be a tolerance problem
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
cyclic boundaries Zealouk CD-adapco 0 September 17, 2008 11:28
cyclic boundaries gosia stein CD-adapco 5 June 13, 2007 07:39
Cyclic boundaries sampaio Open Source Meshers: Gmsh, Netgen, CGNS, ... 1 February 7, 2006 14:26
cyclic match errors sankar CD-adapco 3 December 3, 2004 07:46
Cyclic Boundaries -> Match Option -> Arbitrary Derek CD-adapco 1 August 4, 2004 22:06


All times are GMT -4. The time now is 01:31.