CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

PROAM: Problem in mesh generation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 5, 2008, 06:53
Default PROAM: Problem in mesh generation
  #1
Bala
Guest
 
Posts: n/a
Hello all,

For an external flow analysis with a very large subsurface thickness, after mesh generation its placing cells only in the subsurface thickness otherwise inside the geometry. How to specify in PROAM to place the cells between the external domain and the subsurface???

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mesh generation problem Ellen FLUENT 7 February 18, 2009 22:20
problem in mesh generation-PROAM Bala CD-adapco 0 February 21, 2008 05:27
mesh generation problem giyong CD-adapco 2 May 12, 2007 09:08
Problem with mesh generation Nestor FLUENT 3 November 1, 2006 03:54
Mesh generation problem Lam FLUENT 2 December 25, 2003 13:37


All times are GMT -4. The time now is 14:03.