CFD Online URL
[Sponsors]
Home > Forums > CD-adapco

Assigning Wall Roughness in STAR-CD

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 8, 2008, 01:51
Default Assigning Wall Roughness in STAR-CD
  #1
Sachin
Guest
 
Posts: n/a
Hi ,

I am trying to assign roughness to no slip wall. I could see that there are three constants A , B and C which has by default values of 8.5, 0 and 1 respectively. Then user has to input efective wall roughness(y0) and displancement(D). I went through Manual. Then I did calculate thickness of laminar sublayer. The roughness I want to include corresponds to completely rough wall. My question is that while assigning copletely rough wall, shall I have to just input efective wall roughness (y0) and have to keep everything else (A,B,C and D) as it is ? is this correct what I understood from Manual and reference for wall roughness. Thanks in advance. Thank you for your time and consideration.

--------------------------------------------------------------------------------

  Reply With Quote

Old   March 11, 2008, 13:24
Default Re: Assigning Wall Roughness in STAR-CD
  #2
tom
Guest
 
Posts: n/a
You may have noticed that this question has been avoided by the board members. To say using the roughness is a black art is an understatement. If you trace back to the original reference you will find that the roughness is actually sand roughness, which is not the same as the roughness on the Moody diagram. My company fianlly gave up and wrote a subroutine to use our own friction based on our roughness models.

Tom
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wall Roughness LKF FloEFD, FloWorks & FloTHERM 5 May 8, 2008 11:22
Assigning Wall Roughness in STAR-CD Sachin Patil CD-adapco 0 March 6, 2008 04:05
Wall Roughness Rex FLUENT 0 February 5, 2002 11:54
wall roughness merac Main CFD Forum 2 June 14, 2001 20:48
How can I set wall roughness? Ellen FLUENT 5 February 27, 2001 23:13


All times are GMT -4. The time now is 08:34.