CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Star-design/CCM problems

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 10, 2008, 18:16
Default Star-design/CCM problems
  #1
GG
Guest
 
Posts: n/a
Its very urgent, if you know it, please help , thanks very much indeed.

Basicly i am modelling the ventilation flows in a small room with a heat source placed in the middle.

I made a single room with a lower opening (about 0.2 m2)as inlet with vel. mag 0.2m/s with temp 15 degree) and upper opening as outlet , and applied an area of 1x1m face as heat flux 1200w/m2 at floor level of the room, in order to form heat-driven flow in the room, however after running it , the temperature is very big >1000k , how come ? i tried many times, still cant fix it.

  Reply With Quote

Old   March 12, 2008, 03:45
Default Re: Star-design/CCM problems
  #2
matej
Guest
 
Posts: n/a
have you:

* checked the mesh?

* used Coupled solver or segregated?

* tried to switch outlet to pressure outlet?

* tried to turn the heat source to 1/10 of what you want?

* turned on the gravity and set properly?

* turned on the ideal gas or constant density? (and in later case set the reference values properly)

* used the temperature or enthalpy formulation in physics module

* checked with another turbulence model?

what about the convergence of variables?

matej

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to export a mesh from star design to star cd aounallah CD-adapco 4 March 6, 2009 06:22
y+ value in Star design Waseem Main CFD Forum 0 December 10, 2008 07:55
star-cd and design GG CD-adapco 4 March 2, 2008 09:31
STAR-DESIGN M Patel CD-adapco 4 November 22, 2005 09:17
Star Design to Star-CD(Prostar) AB CD-adapco 5 October 28, 2004 12:21


All times are GMT -4. The time now is 21:09.