CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

could some one tell me how to use command"CSHELL"

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 17, 2008, 00:43
Default could some one tell me how to use command"CSHELL"
  #1
oni
Guest
 
Posts: n/a
Hi all I used STAR CD4.02.

Proam manual wrote "If the shells in question have not been created in pro-STAR but have been imported from external sources, it is important to associate them first with their adjacent fluid cells. The association operation may be performed using command CSHELL." .

Shells in my cell table are no.2 and no.3 . Fluid is no.4 .

I inputted CSHELL => all

but it did not work.

Messages on the prostar out:

MESH*> cshell

ENTER ICTID, NC1(1),NC2(NC1),NCINC(1)

CSHE*> all

43456 BAFFLES AND SHELLS FOUND

0 BAFFLES AND SHELLS ASSOCIATED WITH FLUID CELLS IN THE RANGE

Could someone help me? Thanks

  Reply With Quote

Old   March 17, 2008, 03:08
Default Re: could some one tell me how to use command"CSHE
  #2
Balduin Bankerotti
Guest
 
Posts: n/a
There was a bug with the cshell command in one of the earlier prostar-v4 versions. Try it with the latest version (v404_12).
  Reply With Quote

Old   March 17, 2008, 04:10
Default Re: could some one tell me how to use command"CSHE
  #3
oni
Guest
 
Posts: n/a
Sigh.. I think there 's a bug in export mapped data to ABAQUS too.

When I selected Map Wall Data button,the segmentation fault appeared.

  Reply With Quote

Old   March 17, 2008, 05:18
Default Re: could some one tell me how to use command"CSHE
  #4
oni
Guest
 
Posts: n/a
If I want to associate the shell with the fluid and make couples between them..

Should I create another shell in the cell table

and add the new shell on the fluid surface that I want to make couples with original one..

Finally use CSHELL to make couples between original shell and the new shell ?

Thanks !!
  Reply With Quote

Old   March 17, 2008, 16:33
Default Re: could some one tell me how to use command"CSHE
  #5
Pauli
Guest
 
Posts: n/a
Your description indicates you are using the command incorrectly.

You entered cshell,all. The command should be cshell,ictid,all.

  Reply With Quote

Old   March 17, 2008, 22:31
Default Re: could some one tell me how to use command"CSHE
  #6
oni
Guest
 
Posts: n/a
Thank you very much, Pauli.

But after I knew how to enter correctly, I tried "CSHELL

ICTID CSET".

It still did not work.
  Reply With Quote

Old   March 17, 2008, 23:01
Default Re: could some one tell me how to use command"CSHE
  #7
Pauli
Guest
 
Posts: n/a
You need to replace ICTID with the shell ctype.

At the command line enter "help cshell" & follow the instructions.
  Reply With Quote

Old   March 20, 2008, 06:05
Default Re: could some one tell me how to use command"CSHE
  #8
oni
Guest
 
Posts: n/a
Thank you again for your advice.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
help on a command.. Vasilios FLUENT 0 January 23, 2008 09:53
Ptrack command Albessu CD-adapco 0 August 23, 2006 09:04
-> (command) Vasilios Papaioannou FLUENT 0 March 29, 2004 06:18
Text command of monitor-command? Mika FLUENT 0 March 27, 2001 13:46
PIL command Mehdi BEN ELHADJ Phoenics 1 February 7, 2001 09:03


All times are GMT -4. The time now is 09:41.