CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   source term in a gas mixture problem (http://www.cfd-online.com/Forums/cd-adapco/56539-source-term-gas-mixture-problem.html)

 Kevin March 27, 2008 06:55

source term in a gas mixture problem

I am considering a gas mixture flow (A+B). I have set my problem as followings: bg fluid : A (density=ideal) active Scalar(01) : B

In my problem, gas B is being consumed at a rate of -10kg/m3s and gas A is also consumed at a rate of -30kg/m3s in a specific region.

To model this system, I have put the sorce terms as followings:

FLUXI = -40 in fluinj.f

S1P = -10 - FLUXI*SCALAR(01) in sorsca.f

However, I observed that the density of gas B ( =density*SCALAR(01) ) increases while I expect it would decrease due to the consumption.

So, I am puzzled now. What am I wrong with this problem? I'd like to get your valulable comments.

Thanks in advance.

Kevin

 All times are GMT -4. The time now is 01:37.