CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

question regarding LES

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 17, 2008, 23:59
Default question regarding LES
  #1
usker
Guest
 
Posts: n/a
Hi everyone,

In Star-CD 3.26 Methodology on page 2-25 under LES Models section it is written "The current implementation in STAR-CD is valid for density-varying, non-isothermal, low-speed flows (free stream Mach number less or equal 0.6)".

In case of simulating diesel spray, if a free stream is injected fuel, then it means that LES model in Star-CD is limited to low injection pressures. Because if we calculate Mach number, to get 0.6, the injection velocity must be lower than that in contemporary Common-Rail Injection Systems. If a free stream is ambient gas, then this LES model is perfectly applicable to this kind of problems.

Any help will be really appreciated

  Reply With Quote

Old   June 29, 2008, 18:33
Default Re: question regarding LES
  #2
Andrea
Guest
 
Posts: n/a
I think you're right: LES is applicable only on low speed flows and so you can't use it to study the diesel injection problem of a common rail system, where you get injection velocity with Mach > 0.6.
Bye Usker,
Andrea
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
C question kar OpenFOAM Running, Solving & CFD 26 May 20, 2008 06:05
Question concerning VOF Flora FLUENT 2 July 9, 2007 09:50
question about LES gino briganti FLUENT 3 June 27, 2005 06:05
The question about Y+ rambol CFX 2 November 7, 2002 10:40
Another UDF question Christian FLUENT 7 July 23, 2002 04:19


All times are GMT -4. The time now is 17:24.