CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

K + Epsilon continua initial conditions in CCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 1, 2008, 11:29
Default K + Epsilon continua initial conditions in CCM+
  #1
dburns
Guest
 
Posts: n/a
How can I use a converged model to calculate the initial conditions (TDR and TKE) for a new case on similar geometry in Star-CCM+?
  Reply With Quote

Old   July 1, 2008, 16:29
Default Re: K + Epsilon continua initial conditions in CCM
  #2
Andrea
Guest
 
Posts: n/a
You can try to extract the mean values from your converged solution and then you can use it as initial conditions for the new one... In star 3.26 there was a function called "mapping" the solution onto a new geometry, I don't know if there is that option also in Star-CCM+
Regards
Andrea
  Reply With Quote

Old   July 3, 2008, 11:10
Default Re: K + Epsilon continua initial conditions in CCM
  #3
dburns
Guest
 
Posts: n/a
Thank you Andrea. I searched the users guide for mapping and found lots of useful information.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Burgerbs equation non constant Boundary Conditions Initial Conditions arkangel OpenFOAM Running, Solving & CFD 1 October 2, 2008 14:48
Initial k & epsilon for engine simulation Tomislav Sencic Main CFD Forum 1 November 27, 2007 06:21
Initial conditions Shuo Main CFD Forum 2 July 27, 2007 08:57
Initial conditions = final conditions Chucho CFX 5 December 16, 2005 18:14
Initial guess for k & Epsilon Helal CFX 2 May 8, 2001 05:11


All times are GMT -4. The time now is 18:55.