CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

CCM+ Surface Wrapper Export

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 25, 2008, 11:12
Default CCM+ Surface Wrapper Export
Ross Kippenbrock
Posts: n/a

I am trying to use the surface wrapper to repair a piece of geometry and then export that as a standard file type (.stl, .igs, etc...). Is there any way that I can do this with CCM+ or do I need some sort of intermediate software to complete this export.

Any help would be much appreciated.


Ross Kippenbrock
  Reply With Quote

Old   July 28, 2008, 15:50
Default Re: CCM+ Surface Wrapper Export
Posts: n/a
IGS is geometry, but wrapper does does triangulated geometries. So to get IGS out of that geometry reconstruction is essential. No way to to with ccm+.

Export to triangular formats (like stl) may work with ccm+. However up to 2.08 only possilbe export was adapco database format. However this may have changed.

  Reply With Quote

Old   July 29, 2008, 14:27
Default Re: CCM+ Surface Wrapper Export
Posts: n/a

Right click on Representations -> Wrapped Surface and go to "Export Surface"

Many formats are available including .stl. As BastiL said since the wrapper creates a discrete triangle mesh, .igs will not work.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tgrid wrapper surface Sam FLUENT 4 September 8, 2008 01:58
Any way to export surface integrals into excel? Paul FLUENT 3 March 31, 2008 15:53
Surface Wrapper Zamir Rashid CFX 0 September 18, 2006 11:04
surface wrapper carno CD-adapco 2 February 10, 2005 05:34
Surface export Chris FLUENT 0 June 30, 2003 08:41

All times are GMT -4. The time now is 07:06.