CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Query in two phase flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 31, 2008, 13:38
Default Query in two phase flow
  #1
Venkat
Guest
 
Posts: n/a
Hi,

I'm doing my Masters (MSc) in Automotive engineering project titled "Simulation of 3D Urea spray in diesel exhaust after treatment using CFD". I use STAR CCM+. I need some help with the following message "Field function: Liquid is not available inside subdomain1 region for smoothing...." I get this message while iteration. I'm new to STAR CCM+. I appreciate CD-ADAPCO for its innovative product in this competitive world. I've checked all the required parameters such as physics model,region conditions, solvers and stopping criteria. I designed a simple exhaust pipe (3D Boundary) with catalytic converter and an injector placed at the wall perpendicular to the axis of pipe, using STAR DESIGN. I would like to simulate the fluid flow which would interact with the spray so that i could analyse the droplet distribution at the inlet surface of catalytic converter which is a major concern

I would be grateful to anyone who could help me regarding this warning message.
  Reply With Quote

Old   August 1, 2008, 10:29
Default Re: Query in two phase flow
  #2
NaMe
Guest
 
Posts: n/a
Dont use Scalar option as Smooth Filled.. Use Filled or Filled+Mesh options for your field function.. i think it is the problem
  Reply With Quote

Old   August 11, 2008, 21:17
Default Re: Query in two phase flow
  #3
Venkat
Guest
 
Posts: n/a
Hi,

I'm unable to determine the stopping criterion of what i require, say for instance, sauter mean diameter. How do i check the droplet distribution ? Do i have to create a plane section perpendicular to point of spray where droplet impingement take place ? How do i change the flow angle of spray ? How do i visualize a spray ? If i need to inject Urea + aqueous solution, then i need the chemical in this solver which im unable to find it. But i see other gases and liquids. When i checked the injector details,I've seen injection direction given in x,y,z directions. For instance, if i give 0-1,-1, then it implies 45 deg. How do we interpret this flow angle ? Is there any other way that we can determine flow angle from point of injection ? I don't get the injector position data even when i create an injection point under derived parts. Logically speaking, when we create an injection point in a body, then the co-ordinates of injection point should have updated the injector position under injectors. But it didn't happen. Why ? I need to complete my project in short span of time. I learnt basics of STAR CCM+ myself.

I appreciate anyone who could guide me in answering the above questions or send me any weblink wherein i get the required information.

Thanks

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Two phase flow with phase change Ahmad Al-Zoubi CFX 1 November 26, 2008 04:59
2 phase flow liquid flow solid particles sachin OpenFOAM Running, Solving & CFD 0 August 28, 2008 16:51
how to erport one phase date in two phase flow KUI FLUENT 0 November 8, 2006 09:46
Discrete Phase Model Query johnnyb FLUENT 1 March 5, 2004 13:54
Two-phase/ Single phase mix flow Reza Main CFD Forum 1 August 6, 2003 06:36


All times are GMT -4. The time now is 00:42.